Preparing Cultivator For Operation - Stihl MH 700 Gebrauchsanleitung

5 Preparing Cultivator for Operation

4.9 Transporting
WARNING
■ The gearbox housing may become hot when
working. This may result in the user burning
themselves.
► Do not touch the hot gearbox housing.
■ The tiller may tip over or move during trans‐
port. This may result in injury to people and
damage to property.
► Stop the engine.
► Detach the spark plug socket.
► Secure the tiller with lashing straps, belts or
a net so it cannot tip over and move.
■ The muffler and engine may be hot after the
engine has been running. This may result in
the user burning themselves.
► Tilt and push the tiller towards the user.
■ The tiller is heavy. Attempting to carry the tiller
without assistance may result in injury to the
user.
► Wear gloves.
► The tiller must be carried by two people.
4.10 Storing
WARNING
■ Children are not aware of and cannot assess
the dangers of a cultivator and can be seri‐
ously injured.
► Shut off the engine.
► Store the cultivator out of the reach of chil‐
dren.
■ Dampness can corrode the electrical contacts
on the cultivator and metal components. This
can damage the cultivator.
► Store your cultivator in a clean and dry con‐
dition.
4.11 Cleaning, Maintenance and
Repair
WARNING
■ The hoes may unintentionally start to rotate if
the engine is running during cleaning, mainte‐
nance or repair. This may result in serious
injury to people and damage to property.
► Stop the engine.
► Detach the spark plug socket.
0478-404-9604-B
■ The muffler and engine may be hot after the
engine has been running. This may result in
people burning themselves.
► Wait until the muffler and engine have
cooled down.
■ The gearbox housing may become hot when
working. This may result in the user burning
themselves.
► Do not touch the hot gearbox housing.
■ Abrasive cleaning agents or using a water jet
or sharp objects for cleaning may result in
damage to the tiller or hoes. If the tiller or hoes
are not cleaned correctly, components may no
longer operate correctly and safety devices
may be disabled. This may result in serious
injury to people.
► Clean the tiller and hoes as described in
this instruction manual.
■ If the tiller or hoes are not maintained or
repaired as described in this instruction man‐
ual, components may no longer operate cor‐
rectly and safety devices may be disabled.
This may result in serious or fatal injury to
people.
► Maintain or repair the tiller and hoes as
described in this instruction manual.
■ The user may cut themselves on sharp cutting
edges during hoe cleaning. This may result in
injury to the user.
► Wear work gloves made from resistant
material.
5 Preparing Cultivator for
Operation
5.1 Preparing the Tiller for Opera‐
tion
The following steps must be performed before
commencing work:
► Make sure that the following components are
in safe condition:
– Tiller, 4.6.1
– Hoes, 4.6.2
► Clean the tiller,
► Attach the hoes,
► Attach the front wheel,
► Attach the blade spur,
► Attach the handlebar,
► Attach the cables,
► Attach the transport handle,
► Attach the guard and covers,
► Add gearbox oil,
► Check the gearbox oil level,
► Add engine oil, 6.10
English
15.1
6.1.1
6.3.1
6.4
6.5
6.4
6.7
6.8
6.9
16.3
35