Optional Accessories - Makita DSC121 Betriebsanleitung

Refilling the oil when oil is low
Place the tool on the floor with the oil port facing up.
Always confirm that the tool is completely shut off with
the cutter rod in start position.
Loosen and remove the bolt on the oil port. If the oil is
low, refill to the maximum limit of the oil port with the
designated hydraulic oil, and then tighten the bolt. If oil
overflows, immediately wipe off any excess oil.
NOTE: Use only Makita Hydraulic Oil or JX Nikko
Nisseki Energy Super Highland #46 oil. Do not use
any other type of oil in this tool. Doing so may cause
deterioration of gaskets and other parts, resulting in
breakdown.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Cutting dies
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
11 ENGLISH