Optional Accessories - Makita DMC300 Betriebsanleitung

Cleaning wheel guard and dust
collection cover
Clean inside the wheel guard and dust collection cover
at regular intervals. Blow or wipe off any dirt or dust
accumulated in them.
► Fig.30: 1. Wheel guard 2. Dust collection cover
Air vent cleaning
Clean the air vents of the tool at regular intervals for
smooth air circulation. Remove the dust cover from
inhalation vent and clean it whenever it becomes dirt
and clogged.
► Fig.31: 1. Dust cover 2. Inhalation vent
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Cut off wheel
• Diamond wheel
• Tungsten carbide grit wheel
• Hex wrench
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
16 ENGLISH