Assembly And Function; Construction; Functional Description; Transport, Packaging And Storage - Heiniger Xplorer/E Originalbetriebsanleitung

4

Assembly and function

4.1

Construction

1 Blades
2 Clipperhead
3 Lubrication opening
4 Clipping pressure adjustment
5 Motor unit
6 ON/OFF switch
7 Interlock battery
8 Cord
Fig. 1
4.2

Functional description

2 3
Fig. 2
5

Transport, packaging and storage

5.1

Scope of delivery

1 Clipper
1 pair of clipping blades
1 charger
1 backup battery (depending on device)
1 power supply unit with plug
1 special screwdriver
1 bottle of special lubricating oil
1 cleaning brush
1 case for transport and storage
1 operating instructions
NOTE!
Check to ensure the completeness of the contents and that there is no damage.
X
Please report incomplete package contents or any apparent damage immediately to
your supplier/dealer.
10
The clipper is used for clipping cattle and horses.
1
Two comb-shaped blades are the cutting tool. The
lower blade (2), which is closest to the animal's skin,
is fixed and attached to the housing. The top blade (3)
is agitated crossways that one. The upper blade is set
in motion with the help of a pivot lever. The clipping
pressure between the blades is adjusted via the
adjustable head (1).
Translation of the original instructions / Cattle and Horse Clipper
4 5
6 7 8