Required Tools; Prior To Installation - LIVARNO LUX LSHB 150 B1 Bedienungsanleitung Und Serviceinformationen

7.2. Required tools

The following tools are not supplied. This list can be used for orientation.
The exact nature of the required tools depends on the individual on-site
conditions.
 Ladder
 Voltage tester
 Spirit level, folding ruler, pencil
 Drill with drill bits
 Phillips screwdriver, flat-bladed screwdriver
 Spanner, combination pliers, side cutter

7.3. Prior to installation

The installation must be performed only by an authorised
electrician!
The circuit must be switched off during the installation!
When drilling the holes, make sure that no cables or pipes in
the wall are damaged.
 Before installation, familiarise yourself with the individual parts of the
outdoor halogen spotlight as well as the text and illustrations of these
operating instructions and comply with them.
 Make sure that the cable to which the outdoor halogen spotlight is to
be connected is not live. To ensure that this is the case, remove the
appropriate circuit fuse from your fuse box or switch the fuse to the "0"
position.
 Make sure that the cable is not live using a voltage tester!
LIVARNO LUX LSHB 150 B1
English - 63