Retrofitting A Seuthe Steam Generator (Only For 70190) - roco BR 10 002 DB Handbuch

▪ Retrofitting a Seuthe steam generator (only for 70190)

70190.indd 37 70190.indd 37
First remove the chimney hood and then install the Seuthe steam generator no. 10
(for analogue DC operation) or no. 11 (for digital DC operation).
When dealing with a steam generator installed in digital mode complete with a
retrofitted 10895 or 10896 decoder, it is possible to switch the steam generator on
and off via the F1 key.
Functions when operated with bridge plugs (= analogue operation):
– Light change - white/red (dependent upon direction of travel)
– Seuthe 10 smoke generator (if retrofitted)
Functions when operating with a retrofitted 10895/10896 decoder (= digital
operation):
F0 = Light change - white/red (dependent upon direction of travel)
F1 = Seuthe 11 smoke generator (if retrofitted)
37
10.03.2022 12:57:46 10.03.2022 12:57:46