The steam system is an open system. Therefore, please do not rotate, tilt
or turn the locomotive upside down. Steam oil may otherwise leak from
the system and soil the locomotive.
The open design of the steam system is production-related and does not
constitute a fault.
Caution regarding the steam operation!
We recommend that the steam oil be fully used up during operation and that the steam system then be switched
off. Otherwise, remove the residue from the steam oil tank using a syringe immediately after operation (please
refer to the illustration opposite). This goes a long way to preventing soiling being caused by the steam oil on
the inside.
36
70190.indd 36
70190.indd 36
10.03.2022 12:57:46
10.03.2022 12:57:46