Remote Control - HEYLO K Serie Bedienungsanleitung

All manuals and user guides at all-guides.com
Oil Heater
K 160 eco-e

8. Remote control

If the optional remote monitoring system "e-control K" is installed, the target temperature can
be changed, the unit switched on and off in automatic mode per SMS.
For this purpose, send a SMS with the following contents to the heater's phone number.
The unit shall respond with a confirmation SMS approx. 5-10 min later.
Detailed information can be found in the e-control K operating instructions.
Caution! Case sensitive. Pay attention to upper and lower case spelling!
Target value = password + temperature as one word
Example: Target value change to 20 ° C, password was set to 1234 in the settings = 123420
Activation = password + On as one word
Example: The password was set to 1234 in the settings = 1234On
Deactivation = password + Off as one word
Example: The password was set to 1234 in the settings = 1234Off
Retrieval of the operating status = Info (without password)
Via the WEB portal: http://www.heylo-mietservice.de/vermieter-login.html
the unit status and location can also be inquired.
Furthermore, all error messages are displayed on the portal.
The information is not only available on the PC, but also on any commercially available
smartphone with Internet access.
Example of the presentation in the WEB portal:
Furthermore, the location is to be pinpointed via the portal:
Antenna positions
40 EN