MARIMEX Comfort Spring Aufbauanleitung Seite 48

Step 7
Attach the remaining springs evenly.
WARNING: Trampoline is under heavy
tension, more effort may be required to
attach the springs to the frame. Be careful
not to pinch fingers or slip. Serious injury
may occur.
Step 8
Connect each upper safety
pole and lower safety pole
together by the pin and make
sure the pin is locked.
Step 9
Cover the entire pole with
sleeve.
Step 10
Lay the frame pad (spring pad) around
on top of springs only with flaps hanging
over outside frame. Stick the Velcro on
both ends of frame pad together tightly.
Hang all the elastic strips under spring
pad to the nearest spring hooks. Tie all
black elastic strips under safety pad to
the frame tubes.
Step 11
Tighten the safety pole with attached
screw sets and wrench, as shown in the
picture.
The screw goes through the hole at the
bottom of lower safety pole, plastic
gasket, the hole of the welded tube on
the frame tube (leg extension), gasket for
nut and nut.
48