Programming Aurelia T3 And Digit; Key - Nuova Simonelli Aurelia II Gebrauchsanweisung

7. AURELIA T3
and DIGIT
PROGRAMMING
7.1

KEY

1
4
2 3
1 LCD Display.
2
RESET key to turn the machine on
and off and to exit menu.
3
CURSOR key: to scroll
4
the menu and to increase
and decrease values.
5
ENTER key: to access the menu.
LIST OF DISPLAY FUNCTIONS
(USER Mode)
AUTO CLEAN CYCLE
DOSES
POURING COUNT
TOTAL
MACHINE TOTAL
TOTAL WASHES
60
7.2 PROGRAMMING
(USER Mode)
To enter the user mode programming environ-
ment, press and hold down the
key for 8 seconds and wait to hear the first
acoustic signal.
The machine will read:
AUTO.CLEAN.CYCLE
AUTOMATIC CLEANING CYCLE
5
The display will show:
Fig. 26
AUTO.CLEAN.CYCLE
Press
AUTO.CLEAN.CYCLE
the central key of each unit
fee, will begin to flash on and off. Insert the
blind filter (fig. 2 A07) into the filter-holder,
add half a dose of PULICAFF and attach the
filter-holder into the unit where you intend to
carry out the automatic cleaning cycle.
Carrying out a cleaning cycle in more than
one unit at a time is possible.
Press the
start the unit automatic cleaning cycle.
The display will read
AUTO.CLEAN.CYCLE
where 1L indicates that the cleaning cycle has
been activated within the 1
washing
and the display will read:
SELECT
1 long cof-
1 long coffee key to
¡ L
st
unit. Once the
cycle of 15 deliveries, each one 5 seconds
long, with a 10-second pause between each
one has been completed, the
fee key for the selected group will start to flash
on and off again and the display will read.
RINSE
Press the key to view the next func-
tions or to quit the display mode.
DOSES
The display will read:
DOSES
Press the key and all of the dose,
hot water and steam keys will start to flash.
Pressing one of the flashing keys will show
the corresponding programmed setting on
the display.
Press the key to return to the previ-
ous function.
Press the key to quit the display
mode.
POURING COUNT
The display will read:
DELIVERY COUNT
Press the key and all of the dose,
hot water and steam keys will start to flash.
Pressing one of the flashing keys will show
the corresponding counter on the display.
Press the key to return to the previ-
ous function.
Press the key to quit the display
mode.
1 long cof-