Operating Programs - Maico ECA 100 ipro Montage- Und Betriebsanleitung

8 Installation and commissioning

8.4 Operating programs

• VZC, KVZC, F, KF, B and KB: One of the 4 fol-
lowing operating programs can be set with
jumpers J4 and J5.
• H and KH: One of the 4 following operating
programs can be set with jumpers J4 and J5.
The operating program can only be switched on
with a switch (light switch). If this is switched
on, it takes priority over the automatic humidity
function.
• Program: Comfort (= ex works), Night, Eco-
nomy and Power
Set the desired operating program with jumpers
J4 and J5.
Comfort program
• Power level 1 during room use, power level 2
during overrun time.
• J4 bridged, J5 bridged.
Adjustable
Switch-controlled
start delay
operating time
24
Adjustable
overrun time
Night program
• Power level 2 during room use, power level 1
during overrun time.
• J4 open, J5 open
Adjustable
Switch-controlled
start delay
operating time
Economy program
• Power level 1 during operation and overrun
time.
• J4 open, J5 bridged
Adjustable
Switch-controlled
start delay
operating time
Power program
• Power level 2 during operation and overrun
time.
• J4 bridged, J5 open
Adjustable
Switch-controlled
start delay
operating time
Adjustable
overrun time
Adjustable
overrun time
Adjustable
overrun time