Cleaning And Care Of The B-Intense ® Med; General Cleaning Of The B-Intense ® Med - b-intense MED Bedienungsanleitung

EN
Cleaning and care of the b-intense
The b-intense MED must be cleaned and disinfected after each use on parts in contact with the patient.
®
Please note the warning notices for cleaning.
1. Unplug your infrared cabin from the main power supply before cleaning.
2. Use proper medical disinfectant for the surfaces. Mind the recommended exposure time.
3. Afterwards wipe it dry.
4. Ensure that no liquid enters the b-intense
5. The cabin must never be cleaned using a water hose, pressure washer, steam cleaner or splashing water.
6. The seats and backrests covered with imitation leather are easy to clean with a damp cloth. As the leather covers are made of special
commercial artificial leather, they must be cleaned with a medical disinfectant for surfaces.
7. The protective grids are not to be cleaned.
8. To prevent the transmission of harmful germs, the door handles and the display must be disinfected after each use.
General cleaning of the b-intense
Cleaning, disinfection and care
Caring for your b-intense
Pay attention to the following guidelines:
› Position the b-intense
› Never wet clean your b-intense
› Never use a pressure washer or a steam cleaner for external cleaning
› If possible, use the recommended cleaning and disinfecting agents
› Always use a dry towel underneath while you're seated
Recommended cleaning agents
› Artificial leather: b-intense
› Cabin walls: b-intense
› Cabin ceiling and floor: b-intense
› Glass: b-intense
®
› Metal components: b-intense
Use a lint-free microfiber cloth for cleaning. Never use abrasive or pungent detergents. Disconnect the b-intense
for cleaning.
Control panel
Wet a microfiber cloth with a glass cleaner to clean the control panel. Dry the surface with a dry microfiber cloth. Never wet clean the control panel.
Infrared heaters
Before cleaning, ensure that the infrared heaters have cooled down completely. Wet a microfiber cloth with a glass cleaner to clean the infrared
heaters. Dry the surface with a dry microfiber cloth. Never wet clean the infrared heaters.
heater.
®
MED on a regular basis ensures proper and hygienicly flawless use.
®
® MED on a dry, even floor
MED.
®
recommends a mild, lukewarm soap sud.
®
recommends a mild, lukewarm soap sud.
®
recommends a mild, lukewarm soap sud.
®
recommends a standard glass cleaner without special features.
® recommends a mild, lukewarm soap sud.
MED
®
MED
®
50 50
MED from the power supply
®