b-control MED: Service menu
The service menu allows adjustments to the basic settings after activation of the cabin. Switch the control off to arrive at the service menu.
Press the following buttons in the given order.
1.
2.
3.
4.
After pressing the buttons in the correct order you will arrive at the service menu.
› Press the Music button
› Choose the distinct parameters with the +/– buttons.
› Press the On/Off button to save the selection.
Parameters:
language: Choose between the standard languages English and German.
warm up: Adjust the warm up phase 0–50 minutes at 50 % backheater performance. The default setting is 5 minutes.
start volume: The volume can be adjusted during application. The default volume is set at 3 of max. 10 and can be adjusted in the service
menu.
runtime: The runtime can be adjusted for every individual application. Select the default runtime in the service menu (in steps of 5 minutes
to max. 50 minutes).
fan settings ON-AUTO-OFF: The fan function is not displayed on the control. The fan is always switched ON in default setting, switch it to
OFF or AUTO if desired. The AUTO setting activates the fan automatically at 40 °C and deactivates at lower temperatures.
fan follow up time: After finishing the application, the fan will be activated for 10 minutes in case of higher temperatures than 40 °C.
This default setting can be adjusted to 5 or 15 minutes.
light follow up time: The diffused LED strip will still be activated for 10 minutes, so the cabin is not dark immediately after application.
This can be adjusted to 5 or 15 minutes.
software update: Software updates must only be implemented by b-intense
version: This panel holds information about the software version. This is used for traceability.
to switch between menu items.
.
®
49 49
EN
b-control MED