b-intense MED Bedienungsanleitung Seite 38

EN
Before working on the controller, the power supply must be switched off on all poles (pull the
main plug) and prevented it from being switched on.
The use of components not licensed by b-intense
or reduce the electromagnetic immunity of the device and lead to improper operation and is
therefore prohibited.
During regular operation, the IR heaters can reach high surface temperatures, which can cause
burns when touched.
Only original b-intense components (IR heaters, fan, sensor, etc.) must be connected to the control
®
system. Spare parts have to be ordered from b-intense
Visually check the cabins installation before the first use (there should be no brittle wood, no broken
glass, no nails or screws sticking out, the cabin should stand stable and not loose).
The safe working load for seat and cabin is 120 kg.
Modification of the b-intense
Hot surface. Do not touch the grid of the front and back heater.
Pushing prohibited. Do not move the b-intense MED.
If any malfunctions of the firmware are noticed, please unplug the b-intense MED and report imme-
diately to office@b-intense.
can cause higher electromagnetical emissions
®
.
®
MED is not permitted.
®
38 38