Relay Output - Milltronics Pointek ULS200 Schnellstartanleitung

All manuals and user guides at all-guides.com
Interface
AC
WARNINGS:
The DC input terminals shall be supplied from a source providing electrical
isolation between the input and output, in order to meet the applicable safety
requirements of IEC 61010-1
All field wiring must have insulation suitable for rated voltages.
Notes:
• A circuit breaker or switch in the building installation, marked as the disconnect switch,
shall be in close proximity to the equipment and within easy reach of the operator.
• Relay contact terminals are for use with equipment having no accessible live parts and
wiring having insulation suitable for at least 250 V.
• This product is susceptible to electrostatic shock. Follow proper grounding procedures.
Wiring

Relay output

All relays shown are in their
de-energized (unpowered state).
Power
AC version
100 to 230 V AC supply
7ML19981XB83
DC - relay output
Optional transistor output - DC version only
18 to 30 V
DC version
18 to 30 V DC supply
Pointek ULS200 – QUICK START MANUAL
DC - transistor output
Page EN-7