Mounting Location; Mounting Instructions - Milltronics Pointek ULS200 Schnellstartanleitung

All manuals and user guides at all-guides.com

Mounting Location

Recommendations:
• Ambient temperature within -40 to +60 °C (-40 to +140 °F), -20 °C (-4 °F) if metal mounting.
• Easy access for viewing the display and programming via two push buttons.
• An environment suitable to the housing rating and materials of construction.
• Keep the sound path perpendicular to the material surface.
Precautions:
• Avoid proximity to high voltage or current wiring, high voltage or current contacts, and to
variable frequency motor speed controllers.
• Avoid interference to the sound path from obstructions or from the fill path.
The sound path should be:
• perpendicular to the
monitored surface
• clear of rough walls,
seams, rungs, or
other obstructions
• clear of the fill path

Mounting Instructions

Ideally, mount Pointek ULS200 so that the face of the transducer is at least
Note:
250 mm (9.84") above the highest anticipated level.
Pointek ULS200 is available in three thread types: 2" NPT, 2" BSPT, or 2" G.
Before inserting Pointek ULS200 into its mounting connection, ensure that the threads are of
the same type to avoid damaging them. Simply screw Pointek ULS200 into the process
connection, and hand tighten.
7ML19981XB83 Pointek ULS200 – QUICK START MANUAL
pipe
rungs
seams
fill
Page EN-5