Charging - Bluetti AC200MAX Handbuch

Just Power On
（Figure 3）
(4) Tap the 'Alarm' on the homepage to view the current error message: the
fault indicator will display orange if a fault occurs.

10. CHARGING

(1) From AC wall outlet
● Turn the AC200MAX ON and connect the plug of adapter to the wall outlet,
the other side to the AC input port. Charging will automatically stop when it
reaches 100%(4.6-5.1Hrs).
2
(2) From the solar panels
● Connect the solar panels(in series or parallel) with Open Circuit Voltage
range 10V-145V.
● Connect the solar panel to AC200MAX via the solar charging cable. (Standard
Accessory 3 to Accessory 5)
● Charging: AC200MAX will be activated when the solar charging system is set
up successfully.
● The max input current of solar charging: 15.2A ± 0.3A, the over-current of
solar charging will be wasted.
11