Charging The Product - Bluetti PowerOak AC200P Benutzerhandbuch

be accessed directly from the shortcut key on the main interface;
● Click the "BMS Maintenance" button, you can view the operation information of BMS,
and this part can also be accessed directly from the shortcut key in the main interface;
● Click the "Fault History" button, you can view all the fault information generated by the
machine. All the fault codes recorded here. According to the fault codes, return to the main
interface and click the fault button to view the corresponding fault information. Fault
History is retained up to 10 years if not manually cleared.
(Figure4)
(4) Return to the main interface and click the fault button (Figure 1) to view the current
fault information: the fault button will display orange if there is a fault, click to enter the
corresponding fault information, then the gray light will turn into orange.

6. Charging the product

There are five ways to charge:
(1) Charging mode 1: From AC Wall outlet
● Press the main power button to start charging after connecting the product to the AC
wall outlet, the charging will automatically stop when it reaches 100%.
22