Let's Get Started; Touchscreen - Bluetti AC200MAX Handbuch

7. LET'S GET STARTED

(1) Startup: short press the power button to turn it on; the indicator light is on.
(2) Shutdown: press and hold the power button for several seconds, and the
indicator light will be off.
Troubleshooting
BMS Over-current or short circuit
protection
BMS Startup timeout
Normal startup
Normal shutdown
(3) DC power switch and AC power switch are integrated into the interaction
LCD screen(Homepage), press 'DC ON/OFF' or 'AC ON/OFF' button on the
screen to turn on/off the DC/AC output.

8. TOUCHSCREEN

Interaction LCD screen(Information Vision) supports below functions:
(1) View real-time display of voltage, current, power, temperature, and the
state of charge and discharge.
(2) Adjust the output voltage, frequency, charging mode, power consumption
mode, and time information in the setting column.
(3) Operate with fingers due to resistive touchscreen.
The LED indicator lamp status
Turn off after the indicator light flashes
The indicator light flashes and does not
shut down
The indicator light on
The indicator light off
08
BLUETTI