Basic Settings - Steinbach Poolrunner Battery Basic Originalbetriebsanleitung

The sail might become damaged if the device is stored on its head.
- Never set down the device on its head.
1. Switch off the device before charging.
2. Connect the charger to the device.
3. Plug the charger into a socket.
The charge control indicator is lit red. The
rechargeable battery is charging.
4. When the charge control indicator is lit green,
disconnect the charger from the power supply
and the device.
The rechargeable battery is charged.

Basic settings

Attaching the floating handle
Attach the floating handle so you can place the device in the pool and take it out of the pool in a
controlled manner.
1. Guide the end of the nylon cord of the floating
handle through the eyelet on the handle
5
2. Shorten the nylon cord to a length that roughly
corresponds to the depth of your pool and tie it
in a knot.
The floating handle is attached.
Attaching the sail
1. Attach the sail on the side of the water
4
discharge nozzle .
9
The sail is installed.
Adjusting the wheels
You can adapt the working radius by adjusting the wheels.
We recommend the following settings:
NOTICE!
1
2
.
8
8
3
5
4
9
23