Silvercrest SLM 10 C1 Bedienungsanleitung Und Sicherheitshinweise Seite 44

SilverCrest SLM 10 C1
•
Connect the USB A plug of the charging cable (B) to a suitable USB
mains adapter.
Connect the Micro USB connector of the charging cable (B) to the Micro
USB charging socket (7) of the speaker. The power/charging LED (12)
lights up green while charging and then lights up green when charging
is complete.
•
•
Disconnect the USB charging cable (B) from the speaker after
charging and close the appliance lid (9).
A low battery level will be indicated as follows:
A series of beeps will sound and the power/charging LED
(12) will briefly light up red. Then, the power/charging LED
(12) will display the current operating mode again.
This process is repeated in increasingly shorter intervals until
the battery is depleted. The speaker will then switch off
automatically.
42 - English