Rewinding The Film; Removing The Film - Nikon Lite Touch Zoom 70W Bedienungsanleitung

Rewinding the film

Film rewinds automatically.
At the end of the film roll, the film rewinding starts automatically.
While the film is rewinding, the number on the frame counter
decreases one by one. When rewinding is complete, " "
blinks, then stops blinking and remains lit.
If rewinding stops midway through the roll because of a dead
battery, it resumes automatically as soon as the battery is replaced.
Do not open the camera back until the letter " " starts blinking.
To rewind the film at mid-roll
Press the
the stud on the end of the strap lug or the point
of a ball-point pen.
Once rewinding starts, there is no need to keep the button pressed.

Removing the film

1. Make sure rewind is complete by
checking the letter " " indication.
2. Open the camera back and remove the film.
(mid-roll rewind) button using
Basic Operations
17