Rewinding the film
Film starts to rewind automatically when film
reaches the end of the roll.
While the film is rewinding, the number on the frame counter decreases
one by one. When the film is completely rewound, " " appears.
If rewinding stops midway through the roll because of a dead battery, it
resumes automatically as soon as the battery is replaced with a new one.
To rewind the film in mid-roll.
Removing the film
Lite Touch Zoom 100W QD
Downloaded from
www.Manualslib.com
Do not open the camera back until " " starts lighting and the rewinding
motor stops.
If the camera back is opened before " " lights, the followings may occur:
• The film is exposed.
• Shortly after a new film is loaded, it is rewound and " " is displayed.
Lite Touch Zoom 100W
manuals search engine
Press the mid-roll rewind (
button using a ball-point pen.
Once rewinding starts, there is no need
to keep the button pressed.
1
Confirm that film is
completely rewound.
Film is completely rewound when " "
is displayed.
Open the camera back
2
and remove the film.
En
)
Basic Operations
23