Rewinding the film
Film starts to rewind automatically when film
reaches the end of the roll.
While the film is rewinding, the number on the frame counter decreases
one by one. Film is completely rewound when the frame counter shows
flashing " " for approx. 20 seconds in the LCD panel, then " " appears
without flashing.
If rewinding stops midway through the film roll due to a weak or dead
battery, replace the battery. The film counter displays " " and rewinding
resumes automatically as soon as the battery is replaced.
Do not open the camera back until " " starts flashing.
To rewind the film in mid-roll.
Removing the film
Lite Touch Zoom 150ED
Lite Touch Zoom 150ED QD
Press the mid-roll rewind (
button using the stud on the
strap lug or a ball-point pen.
Once rewinding starts, there is no need
to keep the button pressed.
1
Confirm that film is
completely rewound.
Film is completely rewound when " " is
flashing (" " appears without flashing) in
the LCD panel.
Open the camera back
2
and remove the film.
Basic Operations
En
)
25