Data Logger [Mspro]; Storing Data - Optris Ms Bedienungsanleitung

All manuals and user guides at all-guides.com

Data Logger [MSPro]

The MSPro has an internal data logger for 20
values.
S D
TORING ATA
Please make your measurement and release
the T – the unit is in the HOLD mode.
RIGGER
Pressing the D button will show the next
OWN
free data logger position (flashing) and a disc
icon in the display. With U
change the data logger position manually.
Pressing M will store the data into the logger
ODE
(confirmed by a twofold acoustic signal).
R D
ECALL OF ATA
Please press the T
RIGGER
simultaneously. The next free data logger
position and a disc icon (flashing) will be shown
in the display. With U
P
select any data logger position. To switch
between IR temperature value and t/c probe
value please press the M
R D L
ESET OF THE ATA OGGER
Please press the D
OWN
mode. Select logger position 0 and press M
again. A threefold acoustic signal confirms the
successful reset.
optris MS – DE2011-04-A
and D you can
P OWN
and M
ODE
and D you can
OWN
button.
ODE
button during the HOLD
ODE
31