hanseatic HG6085D14J7635EI Gebrauchsanleitung Seite 71

Recess dimensions
820 mm
(c)
3. Affix the condensation protection film
supplied (c) to the underside of the work-
top. In this way, you will avoid damage to
the work surface as a result of hot steam
which may be emitted from the dishwash-
er if the appliance door is left open.
4. Place the dishwasher in the desired posi-
tion.
Set-up, connection and initial start-up
90°
Inlet/outlet area
580 mm
and electrical con-
nection.
600 mm
90°
80 mm
100 mm
5. In order to compensate for uneven floor
surfaces and set up the dishwasher on a
level horizontal base, you can screw the
four adjustable feet (31) in or out. The
adjustable feet have slots around their cir-
cumference. Insert a screwdriver and turn
the adjustable foot.
Use a spirit level to set up the dishwasher.
Page EN-31
(31)