LIVARNO LUX LSLB 100 A1 Bedienungsanleitung Und Sicherheitshinweise Seite 30

LIVARNO LUX LSLB 100 A1
Then guide the power cable through the cover
of the terminal box (7) as shown in the diagram
opposite.
Now connect the power cable to the screw
terminal (13), making sure it is wired correctly.
Note the labelling of the individual terminals.
Please also note the illustration [B] on the cover
page.
DANGER! If the colour coding of
your connection cable differs from
the illustration provided, the
connection cable must be tested by
a qualified electrician in order to
determine the assignment of the
individual wires.
Now fit the strain relief by fixing the clamping
bracket (arrow) supplied with the 2 screws, also
supplied, over the power cable.
Then fit the power cable fixing (8) and the seal
underneath it back to the cover of the terminal
box (7) by screwing and tightening clockwise,
using an open-jawed spanner if required.
28 - English