Selecting The Midi Base Channel - Korg EC350 Bedienungsanleitung

To connect the EC350 to a computer, you need a MIDI interface for the computer,
sequencing or musical notation software, and two standard MIDI cables. Connect
the EC350 MIDI OUT connector to the MIDI IN connector of the computer. Con-
nect the EC350 MIDI IN connector to the MIDI OUT connector of the computer.
For example:

Selecting the MIDI base channel

MEM MEM
The MIDI standard has 16 separate channels available for transmission and recep-
tion of data. When turned on, the EC350 receives on all 16 channels, and transmits
on a single channel. To transmit and receive data from the EC350, you need to
choose which of the 16 channels is the MIDI base channel.
Hold down the TRANSPOSE/FUNCTION button, and press the note in the range
C2–D#3 corresponding to the desired MIDI channel.
Key
C2
D2
E2
F#2
G#2
A#2
C3
D3
36
MIDI IN
MIDI OUT
Channel
1
3
5
7
9
11
13
15
EC350 connections
panel
MIDI OUT
MIDI IN
Key
C#2
D#2
F2
G2
A2
B2
C#3
D#3
Channel
2
4
6
8
10
12
14
16
Chapter 7