Korg EC350 Bedienungsanleitung Seite 49

If you like, turn the stand over, with the outer part of the right leg panel resting on
7
the floor, and, after removing the protective tape, fix the power supply (F) with the
Velcro strip located under the pedal beam, as shown in the diagram. Fix power sup-
ply cables with the small clamps located under the pedal beam, as shown in the dia-
gram.
With two persons, lift the piano (E) in such a way as to be able to get to its bottom
8
part. Screw the short bolts (c) a few millimeters into the two holes near the back of
the piano. Leave most of the bolts free (not fully tightened).
c
Assembling the stand
F
E
F F
c
47