Rear Panel - Korg EC350 Bedienungsanleitung

Rear panel

Connectors are located underneath the back of the piano.
1 MIDI (IN, OUT) connectors: These connectors are used to connect other MIDI
devices (sequencer, keyboards, etc.). OUT: Data output (to be connected to the
MIDI IN connector of another MIDI device). IN: Data input (to be connected to the
MIDI OUT connector of another MIDI device). See page 35.
2 PC/MIDI selector: This switch selects whether you can use the MIDI connectors
or the PC (TO HOST) connector.
Warning: Change the setting of the PC/MIDI switch only when the instrument is
turned off.
3 PC TO HOST connector: This connector allows the EC350 to be directly con-
nected to a personal computer, provided it is fitted with a serial interface. A dedi-
cated software driver may be needed, and can be freely downloaded from our web
site. Please read the relevant instructions included with the driver.
4 PEDALS connector: Connect the supplied pedal group to this connector. See
page 20.
12
1
4
5
2
6
3
7
Chapter 1