Long Ribbon Velocity; Global Midi Channel; Long Ribbon Midi Channel; Transpose - Korg RK-100S Bedienungsanleitung

127 All notes will sound at maximum velocity
(127). This setting mimics the behavior of early
analog synths.
Cu.7 and 8 produce little change for medium-strength
playing. However, these curves will produce a great
deal of change with softly played notes, so they may be
more difficult to control. Choose the curve that is most
appropriate for your playing dynamics or for the effect
you want to obtain.
3. Press the SHIFT button to exit the shift function.

Long ribbon velocity

This allows you to specify the velocity when using the long
ribbon controller to play scales.
1. Hold down the SHIFT button and press the favorites
B button.
The velocity setting appears in
the display.
2. Use the OCTAVE +/- buttons or
the SOUND lever to specify the
velocity setting.
The velocity setting range is 1 – 127.
If oFF is selected, no sound is produced when the long
ribbon controller is used.
3. Press the SHIFT button to exit the shift function.

Global MIDI channel

In order to exchange data with a connected external MIDI
device, you must set the RK-100S's Global MIDI channel
to match the MIDI channel of the external MIDI device.
1. Hold down the SHIFT button and press the favorites
C button.
The number of the Global MIDI
channel appears in the display.
2. Use the OCTAVE +/- buttons or
the SOUND lever to specify the
Global MIDI channel.
3. Press the SHIFT button to exit the shift function.
4. Set the MIDI channel of the connected external MIDI
device.
Note: For details on how to set the MIDI channel of the
external MIDI device, refer to the owner's manual of the
connected device.

Long ribbon MIDI channel

This allows you to specify the MIDI channel when using
the long ribbon controller to play.
Specify a setting when using a program with sound
generation set to Multi (Voice mode: Multi) or when the
external MIDI device that's connected to the MIDI OUT jack
is being played using the long ribbon controller, instead of
the keyboard.
When the setting is changed, sound from the RK-100S
can no longer be produced with the long ribbon
controller.
1. Hold down the SHIFT button and press the favorites
D button.
The number of the long ribbon
MIDI channel appears in the
display.
2. Use the OCTAVE +/- buttons or
the SOUND lever to specify the
MIDI channel.
GLb: The MIDI channel will match the global MIDI
channel (see "Global MIDI channel") .
r.01...r.16: 1ch..16ch
Tip: When using the long ribbon controller to control an
external MIDI device that's connected to the MIDI OUT
jack, specify the same MIDI channel that's specified on the
external MIDI device.
3. Press the SHIFT button to exit the shift function.
Note: When the arpeggiator is turned on, note messages
are transmitted from the MIDI OUT jack with the global
MIDI channel.

Transpose

This allows you to specify overall pitch in steps of a
semitone (100 cents). Use this when you want to transpose
to suit the song you are playing over a range of one octave
up or down.
1. Hold down the SHIFT button and press the favorites
E button.
The transpose setting appears in
the display.
2. Use the OCTAVE +/- buttons or
the SOUND lever to specify the
transpose setting.
The transpose setting range is one octave up or down
(-12 - 12).
3. Press the SHIFT button to exit the shift function.
Shift functions
15