Operation; Transmitter Controls; Inserting The Batteries Into The Transmitter - Reely 2354308 Bedienungsanleitung

8. Operation

Diagrams are provided for reference purposes only. Markings or colours may differ from the actual vehicle/
transmitter.
a) Transmitter controls
1 Steering wheel for steering
2
Opening for inserting the supplied
smartphone holder
3
Power LED
4 On/off switch
5
Engine lever
6
Battery compartment (on the bottom)
b) Inserting the batteries into the transmitter
Using rechargeable batteries in the transmitter results in a significantly shorter battery life due to the lower
voltage (disposable batteries = 1.5 V, rechargeable batteries = 1.2 V). For this reason, always use non-
rechargeable batteries in the transmitter.
• Unscrew the screw from the battery compartment cover on the
bottom of the transmitter (A). Then, slide the battery compart-
ment cover out towards the front (B).
• Insert 2 AA batteries into the battery compartment (C). Ensure
that the batteries are inserted with the correct polarity (posi-
tive/+ and negative/-, see marking on the batteries and the bat-
tery compartment).
• Close the battery compartment again. Replace the battery com-
partment cover and secure it in place with the screw that you
previously removed.
32
2
1
A
B
C
3 4
5
6