Buchi Rotavapor R-250 Pro Bedienungsanleitung Seite 77

Büchi Labortechnik AG
Bedienungsanleitung Rotavapor® R-250 Pro
Flange adapter for flasks , SJ29.2/32
To use a 1, 2 or 3 L evaporating flask with SJ29.2/32
Vacuum pump Sogevac SV40
Rotary vane pump with a flow rate of 40 m³/h and an
ultimate vacuum of < 2 mbar.
Foam detector assembly
Internal sensor detects rising foam and triggers a short
aeration pulse, eliminating foam.
Only in combination with a descending glass assembly.
AutoDest sensor cpl.
For automatic distillation. Measures temperature of cooling
media.
Vacuum is adjusted according to cooling capacity of
condenser.
Vacuum valve, 4 mm, 24 V, connection piece
12.5 mm
Electrical valve for vacuum regulation when operated with a
non-BUCHI vacuum pump.
Vapor duct with integrated sinter plate
The integrated sinter plate P3 protects the condenser
assembly against powder and dust during the drying
process.
Cooling water flow sensor
Checks the flow of coolant, stopping operation when flow of
coolant is insufficient or interrupted.
Cooling water temperature sensor
Needed to display the coolant temperature for optimal
distillation settings.
Cooling water valve
Eliminates unnecessary water waste by stopping cooling
water flow when not in use.
Level sensor for receiving flask
For defined concentration of product or to prevent an
overflow of the secondary condenser if combined with a
Vacuum Pump V-600 with secondary condenser
Stopper, PE, 120 mm
To close the evaporating flask
Communication cable. BUCHI COM, 15 m, 6p
Enables connection between Rotavapor®, Interface,
Vacuum Pump, Recirculating Chiller, VacuBox and
LegacyBox.
Best. Nummer
11058738
034063
11056083
11064486
11055928
041100
11055971
11055988
041191
11056192
11057349
11064090
Anhang | 12
Grafik
77/80