eQ-3 homematic IP Evo Montage- Und Bedienungsanleitung Seite 45

First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, refer to the operating
manual of the Access Point.
To integrate the radiator thermostat into your system
and enable it to communicate with other Homematic IP
devices, you must teach-in the device to your
Homematic IP Access Point first.
To teach-in the device, please proceed as follows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item "Teach-in device".
Open the battery compartment (C) by pushing
•
the battery compartment cover (C) down (see
fig. 3).
• Remove the insulation strip from the battery
compartment of the radiator thermostat. Teach-
in mode remains activated for 3 minutes.
After removing the insulation strip, the motor re-
serves to facilitate subsequent installation. Mean-
MANU
BOOST
while, "
played.
" and the activity symbol ( ) are dis-
C
Start-up
45