Declaration Of Conformity - Stihl ADVANCE ProCOM Bedienungsanleitung

• Any changes or modifications to the equipment not
expressly approved by the party responsible for compliance
could void the limited warranty to operate the equipment.
• Keep the product free of dust. Dust may damage
mechanical and electronic parts of the product.
• Do not paint the product. Paint may obstruct moving parts or
interfere with the normal operation of the product.
• Do not drop or otherwise shock the product. It may damage
the product or its internal electronic circuits.
• Do not disassemble, repair or modify the product as this
may damage the product and invalidate the product warranty.
• Battery performance will deteriorate over time if stored for a
long period of time without use.
• The earmuff provides audio signal sound pressure level
limitation and the earmuff limits the entertainment audio signal
82 dB(A) effective to the ear.

DECLARATION OF CONFORMITY

Radio Equipment Directive
Hereby, ANDREAS STIHL AG & Co.KG declares that
the radio equipment type ADVANCE ProCOM [SP94]
is in compliance with Directive 2014/53/EU and Radio
Equipment Regulations 2017. The applicable jurisdiction
can be found in the Declaration of Conformity; this can be
found at: www.stihl.com/conformity. This device can be
operated in at least one Member State without infringing
applicable requirements on the use of radio spectrum.
Product: ADVANCE ProCOM
Model: SP94
RF Range for Bluetooth: 2,402-2,480 MHz
Max Output Power (E.I.R.P.) for Bluetooth: 17 dBm
RF Range for mesh: 2,410-2,475 MHz
Max Output Power (E.I.R.P.) for mesh: 12 dBm
Personal Protective Equipment Regulation
The products meet the requirements of PPE Regulation
(EU) 2016/425 and Regulation 2016/425 on PPE as
brought into UK Law and amended. The applicable
jurisdiction can be found in the Declaration of Conformity;
this can be found at: www.stihl.com/conformity
Explanation of the Attenuation Data (Table L)
European Standard EN 352
(L:1) Frequency (Hz)
(L:2) Mean attenuation (dB)
(L:3) Standard deviation (dB)
(L:4) Assumed protection value, APV
H = Hearing protection estimation for high frequency
sounds (ƒ ≥ 2000 Hz)
M = Hearing protection estimation for medium frequency
sounds (500 Hz < ƒ < 2000 Hz)
L = Hearing protection estimation for low frequency sounds
(ƒ ≤ 500 Hz)
USA Standard ANSI S3.19-1974 (Table M)
(M:1) Frequency (Hz)
(M:2) Mean attenuation (dB)
(M:3) Standard deviation (dB)
H = Hearing protection estimation for high frequency
sounds (ƒ ≥ 2000 Hz)
M = Hearing protection estimation for medium frequency
sounds (500 Hz < ƒ < 2000 Hz)
L = Hearing protection estimation for low frequency sounds
(ƒ ≤ 500 Hz)
Australian and New Zealand Standard AU/NZS
1270:2002 (Table N)
(N:1) Frequency (Hz)
(N:2) Mean attenuation (dB)
(N:3) Standard deviation (dB)
(N:4) Assumed protection value
1. KNOWING THE HEADSET
1.1 Layout
(A:1) Left Ear Cup
(A:2) Right Ear Cup
(A:3) Headband
(A:4) Helmet Mount Adaptor - with Function Universal and
ADVANCE X-Climb Helmet : Adaptor A
(A:5) Helmet Mount Adaptor - with ADVANCE X-Vent
Helmet : Adaptor B
(A:6) (+) Button
(A:7) (-) Button
(A:8) Multi-function Button
(A:9) Microphone
(A:10) DC Power Charging & Firmware Upgrade Port
(A:11) Push-To-Talk (PTT) Button
(A:12) Mesh Button
(A:13) S Button
1.2 Material (Table I)
(I:1) Headband
(I:2) Cushions
(I:3) Ear cup supporting arms
(I:4) Ear cups
1.3 Mass (Table J)
(J:1) Weight
15
GB