Herunterladen Inhalt Inhalt Diese Seite drucken

Standby Mode - sportplus SP-WR-8000 Gebrauchsanleitung

Wasserrudermaschine aus holz
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 16
Target value training (TARGET)
TARGET training mode lets you set a target value for a selected function.
1. Press the UP button until the display shows the TARGET training mode.
2. Press the MODE button again to confirm the selected mode.
3. A beep sounds. The time target value flashes.
4. Press the MODE button to toggle to the next function.
5. After selecting a function, the display shows SET and the target value flashes.
6. Press the UP button to increase the target value for: Time (TIME), distance
(DISTANCE), strokes (STROKES), heart rate (PULSE), or calories (CALORIE).
7. Press the MODE button to confirm the setting.
8. Press the START button to confirm the setting and begin training.
9. Once you hit your target value, the display shows STOP. A beep sounds 3 times.
10. Press the START/STOP button and then RESET to stop training early. The product
then enters standby mode.
11. Press MODE to select a new training program.
Recovery mode (RECOVERY)
Recovery mode lets you check your recovery heart rate after a training product.
1. The computer (F) features a built-in receptor for a heart rate sensor suitable for all
common 5.3 kHz chest straps (chest strap not included).
2. Continue wearing the chest strap after training and press the RECOVERY button.
3. The display shows a countdown of 60 seconds.
4. After the countdown runs down, the display shows a status: F1 to F6. F1 is
"excellent", F6 is "poor".
5. Press the RECOVERY button again return to the main menu.

Standby mode

In standby mode, the following values flash on the display: MANUAL, INTERVAL,
TARGET, TIME, DISTANCE, CALORIE, PULSE, SPM, WATT, TIME/500M,
STROKES.
Press the MODE button to select a training mode.
Bluetooth
button
®
Press the Bluetooth
Bluetooth
is activated, the Bluetooth
®
Remote control via app
You can connect the computer (F) via Bluetooth
so, download a suitable app.
SP-WR-1800-IM-V02.indb 47
SP-WR-1800-IM-V02.indb 47
button to turn Bluetooth
®
icon flashes on the display.
®
on the computer (F) on and off. When
®
4.0 to your smartphone/tablet. To do
®
47
1 Sep 2021 6:25:33 pm
1 Sep 2021 6:25:33 pm

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Sp-mr-0081Sp-mr-1800

Inhaltsverzeichnis