Instructions
18
Istruzioni
Empty the large container and the drip tray and place them
back.
Rimuovere e svuotare il contenitore posto sotto il tubo ac-
qua\vapore e la vasca raccogligocce e riposizionarli.
When the green
light turns on, turn the control dial to
the
position. The machine will prime its internal circuits.
Quando il led verde
si accende, ruotare il pomello di
comando sulla posizione
. La macchina esegue un bre-
ve caricamento circuito.
When the green
light turns on, turn the control dial to the
now dispenses through the hot water/steam wand until the water tank is empty.
If you want to stop dispensing (for example to empty the container), turn the con-
trol dial to the
position. To restart dispensing, turn the control dial back to the
position.
Quando il led verde
si accende, ruotare il pomello di comando sulla posizione
. La macchina ora eroga attraverso il tubo acqua/vapore fi no allo svuotamento del ser-
batoio.
Se si desidera interrompere l'erogazione (ad esempio per vuotare il contenito-
re) ruotare il pomello di comando sulla posizione
ne, ruotare il pomello di comando nella posizione
All manuals and user guides at all-guides.com
Rinsing Cycle 1
Ciclo di risciacquo 1
After this, the green
tion. The machine dispenses water internally in the drip tray. It does not dispense through
the hot water/steam wand.
Quando il led verde
do sulla posizione
ce; in questa fase la macchina non eroga dal tubo acqua\vapore.
position. The machine
. Per riavviare l' e rogazio-
.
www.philips.com/support
H
O
2
Rinse the water tank and ll it up to the MAX level with fresh
water. Put it back in the machine.
Estrarre il serbatoio dell'acqua; risciacquarlo e riempirlo
con acqua fresca fi no al livello MAX. Riposizionare il serba-
toio dell'acqua nella macchina.
light starts ashing slowly. Turn the control dial to the
inizia a lampeggiare lentamente, ruotare il pomello di coman-
. La macchina eroga dal suo interno direttamente nella raccogligoc-
After this the green
light starts ashing slowly. Turn
the control dial to the
position. The red
Quando il led verde
inizia a lampeggiare lentamen-
te, ruotare il pomello di comando sula posizione
rosso
si accende.
MAX
posi-
light turns on.
. Il led