Scope Of Delivery; Available Accessories; Display Elements And Connectors; Leds At Front Side - axing CMTS 2-00 Betriebsanleitung

Operation instructions | CMTS 2-00 | Cable Modem Termination System
1.2.

Scope of delivery

1 × CMTS 2-00 Cable Modem Termination System
1 × AC power cord
1 × Grounding cable
1 × Network cable
1 × Quick start guide
1.3.

Available Accessories

BZU 65-85 Diplexer 65/85 MHz
CZU 2-00 Additional power supply unit for CMTS 2-00
1.4.

Display elements and connectors

1.4.1. LEDs at front side

LED Description
PWR A On: The output of the power module A is normal.
Off: The output of power module A is not correct.
PWR B On: The output of the power module B is normal.
Off: The output of power module B is not correct.
10 GE On: The SFB cable is connected and a connection has been established
ALM On (red): If an a failure has occurred
RUN Green blinking: CMTS 2-00 initialization is complete.
Off: CMTS 2-00 initialization is not complete.
PWR On: The power supply is normal.
Off: The power supply is of or voltage to low.
6
PWR B
PWR A 10 GE
2021-09-03 | Technical improvements, changes in design, printing- and other errors reserved.
Reset
ALM
RUN
PWR