Mould Warning - Auriol 4-LD5561-1-2 Bedienungs- Und Sicherheitshinweise

Mould warning

Press and hold °C/°F 7 in normal
display mode. The upper limit 5 and the
2 symbol will appear. You may set the upper limit
by pressing °C/°F 7 or MAX.MIN 6. Wait 10
seconds for the set value to be accepted and the
climate station will return to normal display mode.
When the set value is exceeded, the symbol
2
and the red LED alarm signal 8 will blink. Press any
button to slow the blinking the red LED alarm signal
8 to once approximately every 7 seconds. The
symbol 2 will continue to blink until the humidity
is lowered to below the set value, for example by
airing the room.
- 107 -