If the dew point temperature rises above 50 °C
"HH.H" is shown.
If the dew point temperature falls below 0 °C "LL.L"
is shown.
Setting humidity limits
Press and hold SET 10 in normal display
mode. The upper limit 5 and
The value can be set in 5 % increments by pressing
°C/°F 7 or
MAX.MIN 6. Confirm your setting
by pressing SET 10. The lower limit 5 and
blink. The value can be set by pressing
or
MAX.MIN 6. Confirm your setting by pressing
SET 10. The climate station will enter normal
display mode/current indoor humidity 5.
Low humidity
Normal humidity
High humidity
- 104 -
will blink.
will
°C/°F 7