Kaisai FLY KWX-09 Bedienungsanleitung Seite 41

Example: Setting the unit to turn on after 6 hours, operate for 2 hours, then turn off
(see the figure below)
Your remote display
Timer is set To turn ON
6 hours from current time
Timer is set to turn OFF
8 hours from current time
Timer starts
2PM 3PM 4PM 5PM
Current
time 1PM
6 hours later
8 hours later
Unit turns Unit turns
ON
OFF
6PM 7PM 8PM 9PM
80
How To Use The Advanced Functions
SLEEP Function
The SLEEP function is used to decrease
,
energy use while you sleep (and don t
need the same temperature settings to
stay comfortable). This function can
only be activated via remote control.
, , ,,
For the detail, see sleep operation in
,
,,
, ,
USER S MANUAL.
Note: The SLEEP function is not
available in FAN or DRY mode.
TURBO function
The TURBO function makes the unit work
extra hard to reach your present temperature
in the shortest amount of time possible.
When you select TURBO feature in COOL
mode, the unit will blow cool air with
strongest wind setting to jump-start the
cooling process.
When you select TURBO feature in HEAT
mode, for units with Electric heat elements,
the Electric Heater will activate and
jump-start the heating process.
SELF CLEAN function
Airborne bacteria can grow in the moisture
that condenses around heat exchanger in
the unit. With regular use, most of this
moisture is evaporated from the unit.
When the self clean feature is activated,
your unit will clean itself automatically.
After cleaning, unit will turn off automatically.
You can use self clean feature as often as
you like.
Note: You can only activate this function
in COOL or DRY mode.
81
Mode ON/OFF Fan
Timer Timer Sleep
Follow
LED
me
Self
Short
Turbo
clean
cut
Hold together for one second
to activate LOCK function
LOCK function
Press Turbo button and Blow button
simultaneously for one second to
lock or unlock the keyboard.
FOLLOW ME function
The follow me function enables the remote
control to measure the temperature at
its current location and send this signal
to the air conditioner every 3 minutes
interval . When using AUTO, COOL, or
HEAT modes, measuring ambient
temperature from the remote control
(instead of from the indoor unit itself)
will enable the air conditioner to
optimize the temperature around you
and ensure maximum comfort.