Usb Operation; Troubleshooting - Grundig GSB 950 Bedienungsanleitung

uSB­OPERATION
1­­Insert the USB device.
2­­
Press the (SOURCE)­button repeatedly on
the unit or press the
mote control to select
3­­ During playback:
▪
To pause or resume play, press the
the remote control.
▪
To skip to the previous/next file, press the
/ buttons on the remote control.
▪
Select Repeat/Random Play Options
In uSB­ mode, press the
mote control repeatedly to select a
SHuFFLE option play mode.

TROuBLESHOOTING

To keep the warranty valid, never try to repair
the system yourself. If you encounter problems
when using this unit, check the following points
before requesting service.
No­power
▪
Ensure that the AC cord of the apparatus is
properly connected .
▪
Ensure that there is power at the AC outlet.
▪
Press standby button to turn the unit on.
Remote­control­does­not­work
▪
Before you press any playback control button,
first select the correct source.
▪
Reduce the distance between the remote con-
trol and the unit.
▪
Insert the battery with its polarities (+/-)
aligned as indicated.
▪
Replace the battery.
▪
Aim the remote control directly at the sensor on
the front of the unit.
No­sound
▪
Make sure that the unit is not muted. Press MUTE
or VOL+/- button to resume normal listening.
▪
Press on the unit or on the remote control
to switch the soundbar to standby mode. Then
press the button again to switch the sound-
bar on.
▪
Unplug both the soundbar and the subwoofer
from the mains socket, then plug them again.
Switch on the soundbar.
­ 3 4 ENGLISH
­-----------------------------------------------------------------------------------------------------------
uSB button on the re-
uSB
mode.
­button on
uSB button on the re-
REPEAT/
­ - --------------------------------------------------------------------------------------------
Repeat one :
Repeat folder :
(if there are multiple folders)
Repeat all :
Shuffle Play :
Repeat off :
Tips:
▪
The unit can support USB devices with up to
64 GB of memory.
▪
This unit can play MP3.
▪
USB file system should be FAT32 or FAT16.
• Ensure the audio setting of the input source
(e.g. TV, game console, DVD player, etc.) is
set to PCM or Dolby Digital mode while using
digital (e.g. HDMI, OPTICAL, COAXIAL)
connection.
• The subwoofer is out of range, please move
the subwoofer closer to the soundbar. Make
sure the subwoofer is within 5 m of the
soundbar (the closer the better).
▪
The soundbar may have lost connection with
the subwoofer. Re-pair the units by following
the steps on the section "Pairing the Wireless
Subwoofer with the Soundbar".
▪
The unit may not be able to decode all digi-
tal audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
device is not muted.
TV­ has­ display­ problem­ while­ viewing­
HDR­content­from­HDMI­source.
▪
Some 4K HDR TVs require the HDMI input
or picture settings to be set for HDR content
reception. For further setup details on HDR
display, please refer to the instruction manual
of your TV.
I­ can't­ find­ the­ Bluetooth­ name­ of­
this­ unit­ on­ my­ Bluetooth­ device­ for­
Bluetooth­pairing
▪
Ensure the Bluetooth function is activated on
your Bluetooth device.
▪
Ensure you have paired the unit with your Blue-
tooth device.
OnE
FOLDER
ALL
SHUFFLE
OFF