Grundig GSB 950 Bedienungsanleitung Seite 29

CONNECTION
connection. To enjoy the ARC function, please
ensure your TV is both HDMI-CEC and ARC
compliant and set up accordingly. When
correctly set up, you can use your TV remote
control to adjust the volume output (VOL +/- and
MUTE) of the sound bar.
▪
Connect the HDMI cable ( included ) from
HDMI­(ARC)
unit's
socket on your ARC compliant TV. Then press the
remote control to select­HDMI­ARC.
Tips:
▪
Your TV must support the HDMI-CEC and ARC
function. HDMI-CEC and ARC must be set to
On.
▪
The setting method of HDMI-CEC and ARC
may differ depending on the TV. For details
about ARC function, please refer to the
owner's manual.
▪
Only HDMI 1.4 or higher version cable can
support the ARC function.
▪
Your TV digital sound output S/PDIF mode
setting must be PCM or Dolby Digital
Method­2:­Standard­HDMI
▪
If your TV is not HDMI ARC-compliant, connect
your soundbar to the TV through a standard
HDMI connection.
Use an HDMI cable (included) to connect the
HDMI­OuT
soundbar's
IN socket.
Use an HDMI cable (included) to connect the
HDMI­ IN­ (1­ or­ 2)
soundbar's
external devices (e.g. games consoles, DVD
players and blu ray).
use­the­OPTICAL­Socket
▪
Remove the protective cap of the
socket, then connect an OPTICAL cable
(included) to the TV's OPTICAL OUT socket
and the OPTICAL­socket on the unit.
use­the­COAXIAL­Socket
▪
You also can use the COAXIAL cable (not
included) to connect the TV's COAXIAL OUT
socket and COAXIAL socket on the unit.
▪
Tip:­The unit may not be able to decode all
digital audio formats from the input source.
In this case, the unit will mute. This is NOT
a defect. Ensure that the audio setting of the
input source (e.g. TV, game console, DVD
player, etc.) is set to
­ - ---------------------------------------------------------------------------------------------------------------------
socket to the HDMI (ARC)
socket to the TV's HDMI
socket to your
OPTICAL­
PCM or­Dolby­Digital­
(Refer to the user manual of the input source
device for its audio setting details) with
/­OPTICAL­/­COAXIAL
use­the­AuX­Socket
▪
Use a RCA to 3.5mm audio cable (not
included) to connect the TV's audio output
sockets to the AuX­socket on the unit.
▪
Use a 3.5mm to 3.5mm audio cable (included)
to connect the TV's or external audio device
headphone socket to the­AuX­socket on the
unit.
A
HDMI­
input.
B
ENGLISH
29­