Grundig GSB 950 Bedienungsanleitung Seite 32

AuX/OPTICAL/COAXIAL/HDMI­OPERATION
1­­Ensure that the unit is connected to the TV or
audio device.
2­­ Press the (SOURCE)­button repeatedly on
the unit or the AuX,­ OPT/COA,­ HDMI­
1/2,­ HDMI­ ARC­ ­ ­ ­ buttons on the remote
control to select the desired mode.
3­­
Operate your audio device directly for play-
back features.
4­­ VOL­ +/–
Press the
ume to your desired level.
Tip:­
▪
The unit may not be able to decode all digi-
tal audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
Ensure that the audio setting of the input source
(e.g. TV, game console, DVD player, etc.) is
PCM or­Dolby­Digital
set to
user manual of the input source device for its
audio setting details) with
2­/­HDMI­ARC­/­optical­/­coaxial
▪
In HDMI­ 1­ /­ HDMI­ 2
DOLBY­ATMOS
Soundbar display shows
When the DOLBY­DIGITAL­audio format is entered,
the Soundbar display shows
When the PCM audio format is entered, the
Soundbar display shows PCM­AuDIO.
When entering non-PCM or DOLBY DIGITAL
audio formats, if there's no sound output from
the unit and the display show
FORMAT.
­ 3 2 ENGLISH
button to adjust the vol-
(Refer to the
HDMI­1­/­HDMI­
input.
mode, when the
audio format is entered, the
DOLBY­ATMOS.
DOLBY­AuDIO.
NONSuPPORT­
--