Connection And Operation - Grundig APOLLO 2000 Handbuch

CONNECTION AND OPERATION

Connection
Connecting the mains cable
1
Plug the mains cable into the socket.
Note:
To install the loudspeakers on your HiFi, see the Instruction Manual of the
RCD 2000 HiFi System, Page 16 ff.
This manual also describes how to assign pairs of loudspeakers to different
rooms, if you are using more than one pair.
Connecting loudspeakers cables (if required)
1
Connect the »
» LINE
speaker cables.
Switching on and using the loudspeakers
1
Switch on both loudspeakers using the »POWER« button.
– The red indicators light up.
2
Switch on the HiFi.
Note:
The loudspeakers switch themselves on or off automatically when you switch
the HiFi on or off. The green indicators in the loudspeakers light up.
L PREAMP OUT
IN« sockets on the loudspeakers using single-channel shielded loud-
R« sockets on the RCD 2000 HiFi to the
_____________
11