Moving The Desktop To A Saved Position; Locking The Control Element - sedus temptation c smart/speed Bedienungsanleitung

6.3.2 Moving the desktop to a saved position

With this function, you can move the desk to a saved desktop position. Proceed as follows to do this:
69.8
Danger: There is an increased crushing hazard when the desktop position is changed. For that
reason, ensure that no objects or persons are in the danger zone and that nobody reaches into
the danger zone.
Note: If you press another button while moving the desktop to a saved position, the desktop
stops immediately. Then, you have to activate the desktop movement to a saved position again.

6.3.3 Locking the control element

On control elements with memory function, this function secures the desk against accidental movement.
Proceed as follows to lock the control element:
S-
LOC
1. Press and hold
The desktop will move until the saved desktop position has been reached.
If you release the button before the saved desktop position has been reached,
the desktop stops and the saved desktop position is not reached.
2. The desktop has reached the saved desktop position and stops moving. Now,
release the memory position button.
The current (saved) desktop position is shown on the display.
1. Press and hold the memory button for at least 8 seconds.
"S –" is shown on the display.
2. You can release the memory button as soon as LOC is shown on the display.
The control element is now locked.
the desired memory
71
position button (e.g. 2).