Important Service Notes; Repairs - sedus temptation c smart/speed Bedienungsanleitung

•
Ensure that electrical wiring does not constitute a tripping hazard.
• Unplug the mains plug of mobile electronic devices before moving them.
•
Regardless of the load, the duty cycle of 10% (2 min on / 18 min off) as indicated on the data sheet may
not be exceeded, since it might cause the motor and the control box to overheat. Exceeding the duty cycle
can significantly shorten the system's service life. To prevent this, the temperature is checked inside the
control box, and the system is deactivated if the temperature limit is exceeded. HOT is shown on the display
of the control element (optional)! Another brief operation period is possible after a short cooling-down
period. The necessary duration of the cooling-down period depends on the respective room temperature.

1.5.5 Important Service Notes

Danger: Only use original accessories! They may only be assembled by qualified service
personnel! Otherwise, you will invalidate any warranty and guarantee claims.
Danger: If a fault occurs, contact your responsible Customer Service agent immediately! Only
original spare parts may be used to repair the desk. They may only be replaced by qualified
service personnel! Otherwise, you will invalidate any warranty and guarantee claims.
1.6

Repairs

If a technical defect occurs on this device, please contact a Customer Service agent authorised by us. The
solutions for simple possible error situations can be found in Section 7!
Caution: To avoid malfunctions, all repairs may only be carried out by authorised service
personnel.
Caution: If components of this desk are opened, there is a risk of the following malfunctions.
49