Herunterladen Inhalt Inhalt Diese Seite drucken

During Use; Daily Maintenance; Weekly Maintenance - Nilfisk ALTO GR 8000 Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18

During Use

.........................................................
Cold Water Tank Empty(Number 2 Diagram A)
1. Refill the cold water tank when the refill cold water LED (Number 15 Diagram B) is illuminated.
A buzzer will sound and the steam will no longer come out of the nozzle when the steam switch
on the handle is pressed.
2. Always empty the collection tank each time the cold-water tank is refilled.
3. The pumps will not work when the cold-water tank is empty.
4. Once the cold water refill LED is illuminated the boiler heater will remain on for 30 minutes. If the
cold-water tank is not refilled within 30 minutes and the machine is left powered on the boiler
heater will switch off.
Detergent Tank Empty (Diagram D)
1. If the detergent does not come out of the nozzle when the detergent switch on the handle is
pressed, refill the detergent tank (Diagram D)
Maintenance
Warning: Disconnect the machine from the mains before
cleaning or carrying out any maintenance work.

Daily Maintenance

.........................................................
To be carried out every day or every 8 hours of operation.
1. Grease "O" rings on the steam pin in the steam hose.
2. Wash the hose by sucking one or two litres of water from a basin into the collection tank.
3. Rinse detergent bottle with clean water.
4. Wipe down the body of the machine with a clean damp cloth
5. Always wash the accessories in hot soapy water
8. Wrap the power cable around the handle before storage.

Weekly Maintenance

.........................................................
To be carried out every week or every 50 hours of operation.
As for daily maintenance plus the following:
1. Inspect the power cable for any signs of damage. If damaged do not repair, contact the
supplier of this product. Do not use until repaired.
2. Inspect the hose assembly for any signs of damage. If damaged do not repair, contact
the supplier of this product. Do not use until repaired.
3. Inspect castors to ensure all securing bolts are fully tightened.
English
DO NOT IMMERSE THE MACHINE OR HOSE IN WATER
8

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis