Definition Of Qualified Personnel; Intended Use - Weh CLICKMATE TW154 Betriebsanleitung

1�5

Definition of qualified personnel

- Qualified personnel, as defined by these instructions, are persons who, based on
their professional training, their knowledge (including the relevant standards and
regulations), experience and manual skills, can independently assess and properly
perform assigned work tasks (in conjunction with WEH
independently recognize and prevent potential dangers at an early stage.

2. INTENDED USE

- The CLICKMATE
connection to the filling hose or to existing filling bars (can only be used with weight
and height compensation). The connector comes in many different sizes and forms.
Î Use the CLICKMATE
bars.
Î Use the CLICKMATE
- The WEH Connector is not suitable for emptying gas cylinders under pressure.
®
Î Always ensure that the WEH
particular the technical data of the WEH
on the WEH Product itself.
®
- This WEH Connector has been specially developed for your application and
®
requirements that you specified when placing your order. The connection only works
properly together with your connection and may only be attached to this connection.
- This WEH Product is generally classified as pressure accessory in accordance
®
with Article 2 (5) of the Pressure Equipment Directive 2014/68/EU and is
considered to be similar to piping. This WEH
accessory. Furthermore, it is pointed out, that this WEH
placed on the market in accordance with the requirements of Article 4 (3) of the
Pressure Equipment Directive 2014/68/EU. The assessment with regard to a
different classification can, however, be made on request.
Caution: Any use beyond the scope of application is considered as unintended use
and may result in personal injury and/or property damage.
TW154 was developed for filling breathing air bottles for direct
®
TW154 FL only for filling breating air bottles on existing filling
®
TW154 FS only for filling breating air bottles with filling hoses.
®
Product is used only for its intended use. Please note in
®
Operating instructions
Products) and can thus
®
Product in Chapter 4 as well as the marking
®
Product may not be used as safety
®
®
MD-10081-L51-R1.1.0-03
Product is designed and
Page 9
AE