No�
Maintenance
Lubrication of the actuation unit
12
(see Chapter 10. Lubrication)
Replace the front seal (see Chapter 9.4.1 Replacement of
13
front seal (Pos. 7))
14
Return to WEH for in-factory maintenance
* depending on what happens first
Note: For component arrangement see Chapter 3. Product overview / product description on page 10.
Î
If your application requires, set shorter intervals thanindicated above. A significant shortening of the minimum intervals is
particularly necessary if abnormalities are found during the inspections.
After every 500
Monthly
cycles
X
X
After 3 years or
20,000 cycles *
X